The Glass Bubble Project opened in Cleveland in 1998 and has occupied the same small shop space in the Ohio City neighborhood since. The shop offers a wide range of classes and workshops for the public, in addition to their custom glasswork. In the summer heat, with it's 2000 degree furnaces, the shop can easily reach over 100 degrees. Despite this, many customers brave the heat for the opportunity to try glassblowing under the guidance of the shop's instructors.
The Glass Bubble Project opened in Cleveland in 1998 and has occupied the same small shop space in the Ohio City neighborhood since. The shop offers a wide range of classes and workshops for the public, in addition to their custom glasswork. In the summer heat, with it's 2000 degree furnaces, the shop can easily reach over 100 degrees. Despite this, many customers brave the heat for the opportunity to try glassblowing under the guidance of the shop's instructors.
Instructor Joe Wozniak uses a solid metal rod called a "punty," — distinct from a blowpipe, which is a hollow metal rod — to gather glass from the shop's furnace for his two clients to practice with. The furnace maintains a temperature of 2,100 degrees Fahrenheit during the day (2,400 F at night) and houses the crucible of molten glass from which the shop's artists gather material. It runs 24/7 often for months or years at a time because letting the temperature drop would crack the ceramic pot and cause the glass to solidify into a ruined block.
Instructor Joe Wozniak uses a solid metal rod called a "punty," — distinct from a blowpipe, which is a hollow metal rod — to gather glass from the shop's furnace for his two clients to practice with. The furnace maintains a temperature of 2,100 degrees Fahrenheit during the day (2,400 F at night) and houses the crucible of molten glass from which the shop's artists gather material. It runs 24/7 often for months or years at a time because letting the temperature drop would crack the ceramic pot and cause the glass to solidify into a ruined block.
Glassblowers' benches are uniquely constructed for their craft, featuring two parallel metal rails for the glassblower to roll the punty or blowpipe back and forth as they work with the molten glass. A wide array of tools adorn the workstation and nearby area, all with specialized use cases and strengths.
Glassblowers' benches are uniquely constructed for their craft, featuring two parallel metal rails for the glassblower to roll the punty or blowpipe back and forth as they work with the molten glass. A wide array of tools adorn the workstation and nearby area, all with specialized use cases and strengths.
Brittany Draganic carefully rolls molten glass across the "marver" — a metal table used for shaping and adding color to molten glass straight out of the furnace. She and her father, Pete Draganic, previously tried glassblowing at a different shop but left disappointed with the experience and booked their session at the Glass Bubble Project hoping for a better memory. While working, the glass must be constantly rotated to counteract gravity and maintain symmetry. Molten glass has a consistency similar to honey, and even as it cools the glass maintains a consistency similar to taffy, making it easily manipulated but susceptible to deformation.
Brittany Draganic carefully rolls molten glass across the "marver" — a metal table used for shaping and adding color to molten glass straight out of the furnace. She and her father, Pete Draganic, previously tried glassblowing at a different shop but left disappointed with the experience and booked their session at the Glass Bubble Project hoping for a better memory. While working, the glass must be constantly rotated to counteract gravity and maintain symmetry. Molten glass has a consistency similar to honey, and even as it cools the glass maintains a consistency similar to taffy, making it easily manipulated but susceptible to deformation.
Brittany Draganic uses a wooden, spoon-shaped tool called a "block" to shape the hot glass in the early stages of her piece. The block soaks in a bucket of water up until the moment it is used. When the wet wood comes into contact with molten glass, the water instantly vaporizes and creates a thin layer of boiling steam which the glass "sits" on. This steam barrier prevents the wood grain from burning its texture into the glass and allows for a smooth finish.
Brittany Draganic uses a wooden, spoon-shaped tool called a "block" to shape the hot glass in the early stages of her piece. The block soaks in a bucket of water up until the moment it is used. When the wet wood comes into contact with molten glass, the water instantly vaporizes and creates a thin layer of boiling steam which the glass "sits" on. This steam barrier prevents the wood grain from burning its texture into the glass and allows for a smooth finish.
Joe Wozniak, right, assists Brittany Draganic, left, in placing her piece in the "glory hole" so she can continue working on it. The Glass Bubble Project has two glory holes — smaller furnaces that do not hold any molten glass, but are used to keep glass hot enough to work with throughout a project.
Joe Wozniak, right, assists Brittany Draganic, left, in placing her piece in the "glory hole" so she can continue working on it. The Glass Bubble Project has two glory holes — smaller furnaces that do not hold any molten glass, but are used to keep glass hot enough to work with throughout a project.
Brittany Draganic blows into the end of a blowpipe to create the initial air bubble in the molten glass. Much more difficult than she anticipated, she commented on the force required to create this initial bubble and the control required to avoid putting too much air into the piece.
Brittany Draganic blows into the end of a blowpipe to create the initial air bubble in the molten glass. Much more difficult than she anticipated, she commented on the force required to create this initial bubble and the control required to avoid putting too much air into the piece.
Joe Wozniak, foreground, uses a pad to shape the hot glass while Brittany Draganic, background, blows through the blowpipe at his direction.
Joe Wozniak, foreground, uses a pad to shape the hot glass while Brittany Draganic, background, blows through the blowpipe at his direction.
This pad is actually sheets of newspaper, folded 10 to 15 times and soaked in water before use. Similar to a block, a thin layer of steam separates the glass from the pad and allows the glassblower to shape their piece by hand.
This pad is actually sheets of newspaper, folded 10 to 15 times and soaked in water before use. Similar to a block, a thin layer of steam separates the glass from the pad and allows the glassblower to shape their piece by hand.
Joe Wozniak uses a pair of "jacks" to constrict the molten glass  and create a groove near the blowpipe tip. This process of adding a "jack line" creates a weak point in the glass that will later be used to separate the finished piece from the blowpipe.
Joe Wozniak uses a pair of "jacks" to constrict the molten glass and create a groove near the blowpipe tip. This process of adding a "jack line" creates a weak point in the glass that will later be used to separate the finished piece from the blowpipe.
Joe Wozniak, foreground, uses a pad to shape the hot glass while Brittany Draganic, background, blows through the blowpipe at his direction. This process must be repeated several times because the glass cools as it's shaped and must be carried back to the glory hole to heat it back to it's working temperature of around 2,000 F.
Joe Wozniak, foreground, uses a pad to shape the hot glass while Brittany Draganic, background, blows through the blowpipe at his direction. This process must be repeated several times because the glass cools as it's shaped and must be carried back to the glory hole to heat it back to it's working temperature of around 2,000 F.
Brittany Draganic, right, swings a blowpipe back and forth under the watchful eye of Joe Wozniak, left. By using gravity and the properties of molten glass to their advantage, this process enables glassblowers to uniformly stretch the glass much faster and cleaner than pulling it out with steel tools, which can leave marks or chill the glass too quickly.
Brittany Draganic, right, swings a blowpipe back and forth under the watchful eye of Joe Wozniak, left. By using gravity and the properties of molten glass to their advantage, this process enables glassblowers to uniformly stretch the glass much faster and cleaner than pulling it out with steel tools, which can leave marks or chill the glass too quickly.
Brittany Draganic, left, and Joe Wozniak, right, return Draganic's piece to the glory hole so that they can continue shaping the glass. In front of the glory hole is the "yoke" — a freestanding adjustable metal stand on rollers that is used to support the blowpipe while a piece is reheated. In addition to this function, the yoke also mounts a heat shield — a thin metal barrier that protects the glassblowers body from the heat of the glory hole while allowing them to see and manipulate their piece.
Brittany Draganic, left, and Joe Wozniak, right, return Draganic's piece to the glory hole so that they can continue shaping the glass. In front of the glory hole is the "yoke" — a freestanding adjustable metal stand on rollers that is used to support the blowpipe while a piece is reheated. In addition to this function, the yoke also mounts a heat shield — a thin metal barrier that protects the glassblowers body from the heat of the glory hole while allowing them to see and manipulate their piece.
Joe Wozniak, right, uses a pair of "grabbers" to guide a punty held by Pete Draganic, left, onto the base of his piece. This critical step, when the piece is transferred from the blowpipe to a punty, demands incredible coordination and precision from all involved. The punty is tipped by a small gather of molten glass and must be carefully placed on the exact center of the piece, the attachment must be strong enough to support the piece through the final steps, but not so strong that it become impossible to separate once complete.
Joe Wozniak, right, uses a pair of "grabbers" to guide a punty held by Pete Draganic, left, onto the base of his piece. This critical step, when the piece is transferred from the blowpipe to a punty, demands incredible coordination and precision from all involved. The punty is tipped by a small gather of molten glass and must be carefully placed on the exact center of the piece, the attachment must be strong enough to support the piece through the final steps, but not so strong that it become impossible to separate once complete.
Brittany Draganic, left, uses a punty to create a decorative spiral of glass along her piece as Joe Wozniak, right, instructs her and rotates the blowpipe.
Brittany Draganic, left, uses a punty to create a decorative spiral of glass along her piece as Joe Wozniak, right, instructs her and rotates the blowpipe.
Brittany Draganic, foreground, uses a pair of jacks to shape the opening of her piece while Joe Wozniak, background, watches her and rolls the punty back and forth. The angle of the jacks compared to the ground determines the shape of the lip of the opening.
Brittany Draganic, foreground, uses a pair of jacks to shape the opening of her piece while Joe Wozniak, background, watches her and rolls the punty back and forth. The angle of the jacks compared to the ground determines the shape of the lip of the opening.
Brittany Draganic, left, uses a pair of jacks to shape the opening of her piece while Joe Wozniak, right, assists her using a flat wooden tool called a "paddle." Similar to the other wooden tools used in glassblowing, the paddle is soaked in water before use and contact with the molten glass creates a thin barrier of boiling steam.
Brittany Draganic, left, uses a pair of jacks to shape the opening of her piece while Joe Wozniak, right, assists her using a flat wooden tool called a "paddle." Similar to the other wooden tools used in glassblowing, the paddle is soaked in water before use and contact with the molten glass creates a thin barrier of boiling steam.
Joe Wozniak, left, and Brittany Draganic, right, tap butter knives against the joint between the punty and finished piece. The knives — dipped in cool water beforehand — induce localized thermal shock, weakening the connection point so that the punty can be broken off cleanly. After tapping the joint with the knives, the piece is carefully moved to the "annealer" and a firm tap on the end of the punty breaks it cleanly off. Glass will crack if it cools too quickly, to avoid this, the annealer is essentially an oven that cools the glass in a controlled manner after the artist is done working with it.
Joe Wozniak, left, and Brittany Draganic, right, tap butter knives against the joint between the punty and finished piece. The knives — dipped in cool water beforehand — induce localized thermal shock, weakening the connection point so that the punty can be broken off cleanly. After tapping the joint with the knives, the piece is carefully moved to the "annealer" and a firm tap on the end of the punty breaks it cleanly off. Glass will crack if it cools too quickly, to avoid this, the annealer is essentially an oven that cools the glass in a controlled manner after the artist is done working with it.

You may also like

↑Back to Top